Guangzhou XiangMing (XMlite) light limited is located in Huadu District, Guangzhou (near Baiyun International Airport), established in 2010. Factory size over 8000 square meters. XMlite is an innovative technology enterprise integrating theresearch, development, production and sales of moving head lights.
Why Choose Us
Factory
We are an innovative technology enterprise integrating research and development, production and sales of moving head lights.have many patent certificates and software copyrights.
Quality control
We will carry out strict quality inspection on all products before shipment to ensure the quality of the products and bring you excellent quality enjoyment.
24h online service
We are available 24/7 for the duration of your project and are ready to answer any questions or address any concerns our customers may have.
Professional team
The company focuses on the introduction of high-level talents and the cultivation of professional skills,to create a high-quality,high-efficiency,experienced first-class team.
The LM560 zoom moving head wash light was launched in 2017. It uses 37*15W high brightness 4 in 1 LED light sources (Red+Green+Blue+White). The color mixing is very uniform, and the angle range is 8-38°, it can been install in different high roof.
It is a high performance, long life, high brightness linear zoomable LED moving head wash light, it uses a brand new ABS fireproof engineering plastic shell, uses a constant current circuit board and a total power of 285W, dimming without flicker or jitter; color conversion is smooth, 19 LED beads, optional single-point single-control function.
350w LED Moving Head Light 3 In1 With Cmy Function
planning cepteur sint occaecat planning cepteur sint occaecatEXP372C 350W LED 3 IN1 Moving Head Light. This light is equipped with a 350W WHITE LED engine, providing a higher brightness and more functionality compared to its predecessor, the EXP350.
600W LED SPOT moving head light , which is a high-power LED spot light, use the 600W led engine ,is a new product obtained by simplifying the cutting system on the basis of XMlite 600W LED profile moving head light.
FS800, LED high-efficiency follow spot light is small in size and light in weight; compared with the traditional led follow spot light, XMlite FS800 led follow spot light is an optoelectronic integrated product.
H9 SPOT is a pure spot moving head light derived from the H9 800W LED four-in-one profile moving head light. It integrates light beam, spot and washing into one LED lamp with a zoom angle of 5.5-52 degrees.
H12 SPOT, 1200W LED spot moving head light , it is like H9 SPOT moving head light, H12 SPOT is an LED pure spot moving head light derived from his profile moving head light products, it abandons the framing function of H12 and retains all other functions.
NEX150 ,it is LED version of minihotbeam . this is led 150W hybrid moving head lights, match the international big brand library. It is also is the mini version of XMlite hotbeam light. They share the same DMX channel.
EXP370 LED Moving Head Light is the first medium and low power LED three-in-one light fixture launched by XMlite. It is compatible with the light library of XMlite HOTBEAM280.10R hybrid moving head light.
LED spot moving head lights are also known as Profile moving lights. As the name suggests, Spot moving head lights project illumination in the form of a sharply delineated blob of light. The spot moving lights originally designed as stage light are aimed at creating textures over objects and highlighting particular objects. LED spot moving head lights are light-weight, cost-effective, and can be easily carried around. The plethora of benefits offered by LED spot moving head lights has led to their popularity in record measure of time.
Advantages of LED Spot Moving Head Light
Multidirectional Action
LED spot moving head lights have the ultimate freedom of movement. They can rotate, swing and move freely around 360 degrees illuminating everything in their radius. This allows them to illuminate every inch of the stage as well as the spectators.
Low Power Consumption
LED lights primarily gained popularity because of their low power consumption. As compared to traditional counterparts, the LED spot moving head lights consume relatively less power. However, the power output of LED spot moving head lights is higher than that of traditional lights. Unlike traditional light sources, LED spot moving head lights do not consume electricity when they are not lit.
Cost Effective
LED spot moving head lights are cost-effective as they help save money on the overall electricity bill. They are also low maintenance which saves money in the long run. The widespread use of LED technology means that the initial expenditure on LED spot moving head lights is significantly lower than the traditional light sources.
Better Control
The DMX software offers better control on the LED spot moving head light. Unlike traditional light sources, LED spot moving head lights are not controlled by manual dimmers. The LED spot moving head lights are controlled by a change of current. The LED spot moving head light offers better spot uniformity.
Runs Cool
LED spot moving head lights tend to run cool. They generate a lower thermal radiation. This essentially allows them to be used without interruptions. This also means the lights do not explode or extinguish in the aftermath of overheating. LED spot moving head lights can also be used in cramped spaces without worrying about generating excessive heat.
Better Color Output
LED spot moving head lights offer excellent color spectrums by the amalgamation of Red, Green and Blue (RGB). This allows mixtures of varying colors and intensities to cater to all requirements of users.
Longer Working Hours
LED spot moving head lights offer far longer working hours than traditional light sources. This makes them an excellent choice for frequent stage light users. Again, this ends up saving replacement costs in the long run.
Superior Effect
The LED spot moving head light allows better focus especially in case of acts where the spotlight keeps switching. It also allows the use of many three-dimensional and geometric shapes. This makes LED spot moving head light an excellent choice for use at plays and musical theatres.
How to Project Patterns and Shapes With a LED Spot Moving Head Lights?
A gobo is a thin piece of metal etched with a pattern/shape/text that when placed in front of a beam creates the outline of a design. They sit on a wheel of approximately 8 gobos, so multiple gobos can be used at the same time. On these wheels, they can be projected in a static state to obtain a still silhouette, or they can be displayed while rotating or shaking.
They don't necessarily create shapes when used, as some can break up a solid beam of light and turn it into multiple beams, making it look like you're using more than one. In addition to the available shapes, there are some interchangeable points on the gobo wheel so that you can replace your own gobo pieces that you have on hand or specially made. The open space on the wheel creates a solid beam spot.
How Does an LED Spot Moving Head Light Differ From Beam Moving Head Light?
Differences in Functionality
LED spot moving head lights are designed to produce a concentrated beam of light with a defined shape and focus. They are ideal for highlighting specific areas or objects on stage, such as performers or props. On the other hand, beam moving head lights emit a wider and more dispersed beam of light, creating a sweeping effect across the stage. This makes them perfect for creating dynamic and atmospheric lighting effects that can fill the entire space.
Differences in Applications
LED spot moving head lights are commonly used in theater productions, concerts, and live performances where precise lighting is crucial. They allow lighting designers to create focused spotlights, gobo projections, and intricate patterns, adding depth and dimension to the stage. Beam moving head lights, on the other hand, are frequently utilized in larger venues, nightclubs, and outdoor events where a broader and more intense beam of light is required. They are perfect for creating high-energy lighting displays, aerial effects, and immersive lighting experiences.
Differences in Uses
LED spot moving head lights are often employed to highlight specific performers during a live show, drawing the audience's attention to the main focal points on stage. They can also be used to create dramatic and theatrical lighting effects, enhancing the overall ambiance of the performance. Beam moving head lights, on the other hand, are commonly used to create a dynamic and captivating lighting display that engages the audience. Their wide beam angles and powerful intensity make them ideal for creating mesmerizing visuals and immersive lighting experiences.
1. Physical Setup
Mount the lights: LED spot moving head lights can be mounted on a truss, ground-supported stand, or clamp. Choose a location that provides clear sightines to the stage and minimizes the risk of people or objects obstructing the light beam.
Connect power and DMX: Use a power cable to connect the light to a power source. Then, use a DMX cable to connect the light to a DMX controller. DMX is a protocol that allows you to control the lights remotely.
Configure the addresses: Each LED spot moving head light must be assigned a unique DMX address. This address tells the controller which light to control. Use the light's bult-in menu or a DMX software program to set the address.
2. Control via DMX
Create a DMX universe: A DMX universe is a group of 512 channels that can be used to control up to 512 fixtures. Create a universe for your moving head lights in the DMX controller.
Assign channels: Each parameter of the light, such as pan, tilt, color, and intensity, is controlled by a specific channel in the DMX universe. Assign the desired channels to the corresponding parameters in the controller.
Program scenes and cues: Create scenes to store specific lighting setups for dffrent moments in the performance. Then, use cues to trigger scene changes and other lighting effects during the show.
3. Remote Control
DMX console: A DMX console is a dedicated hardware device that allows you to control multiple LED spot moving head lights simultaneously. Consoles have buttons, faders, and other controls for adjusting the lights in real-time.
Software controller: A software controller is a computer program that allows you to control LED spot moving head lights. Software controllers offer more flexibility and advanced features than consoles, such as timeline programming and visual effects.
Mobile apps: Some LED spot moving head lights have mobile apps that allow you to control them using your smartphone or tablet. This is a convenient option for smaller setups or for making quick adjustments during a performance.
4. Best Practices
Test before the show: Always test your LED spot moving head lights thoroughly before the show to ensure they are functioning properly.
Use a backup system: Consider using a backup DMX controller or software in case of a primary system failure.
Plan your lighting cues: Create a detailed lighting cue sheet that outlines the lighting changes for each scene or musical number.
Communicate with the operator: The LED spot moving head light operator should have clear instructions and communication with the lighting designer and director to ensure smooth cue execution.
Application of LED Spot Moving Head Light
Concerts and Live Performances
LED spot moving head lights are a staple in concert lighting design, where their dynamic movement and versatility are used to create visually stunning effects that enhance the performance. Gobos can project patterns and shapes onto the stage or audience, adding visual interest and enhancing the overall atmosphere.
Theater Productions
In theater productions, LED spot moving head lights are used to create a wide range of effects that enhance the storytelling and visual impact of the performance. Moving headlights can create special effects that enhance the storytelling. For example, they can simulate lightning, create the illusion of movement, or project patterns that represent different settings or environments.
Corporate Events and Weddings
LED spot moving headlights are also used in corporate events and weddings to create dynamic and engaging lighting designs. Gobos can project company logos, branding elements, or personalized messages onto walls, floors, or ceilings. This creates a customized and professional look for corporate events and adds a personal touch to weddings.
Dance Floor
LED spot moving headlights can create dynamic lighting effects on the dance floor, adding energy and excitement to the event. The lights can be programmed to move in time with the music, creating an immersive and engaging experience for guests.
Factors to Consider When Selecting LED Spot Moving Head Light
Intended Use
Determine where you plan to use the LED spot moving head lights and the specific requirements of your lighting setup. Consider factors such as venue size, audience capacity, and the desired lighting effects.
01
Beam Angle
LED spot moving head lights come with different beam angles, ranging from narrow to wide. Narrow angles provide concentrated light beams, perfect for highlighting specific areas or performers, while wider angles offer broader coverage.
02
Output
The output of an LED spot moving head lights refers to its brightness. The required output depends on the size of the venue and the desired lighting intensity. Consider the lumen output and color mixing capabilities to ensure the fixture meets your needs.
03
DMX Compatibility
If you plan to integrate the LED spot moving head lights into a lighting control system, ensure it is DMX compatible. DMX allows you to control the fixture's movement, colors, and various effects remotely.
04
Budget
LED spot moving head lights are available in different price ranges. Set a budget and choose a fixture that provides the best combination of features, performance, and reliability within your price range.
05
How to Maintain LED Spot Moving Head Light
Cleaning: Regularly clean the lenses, gobo wheels, and other external components of the LED spot moving head light. Use a soft cloth or a brush to remove any dust or debris that can affect the light output.
Checking Connections: Periodically inspect the cables and connectors to ensure they are securely connected. Loose connections can cause intermittent operation or damage to the fixture.
Heat Dissipation: LED spot moving head lights generate heat during operation. Ensure proper ventilation to prevent overheating. Clean the cooling vents regularly and avoid placing the fixture in enclosed spaces with restricted airflow.
Storage: When not in use, store the LED spot moving head lights in a secure and dust-free environment. Use appropriate cases or covers to protect the fixtures from damage.
When the lamp is faulty or damaged, please replace the lamp immediately. Otherwise, it may adversely affect other parts.
When replacing the lamp, please make sure that the power connection is in off status.
The power supply must comply with local buildings and electrical requirements and have overload protection functions.
Do not let the highlight directly point at the eyes, it will cause unpredictable injury.
Please make sure that the replacement lamp and the original lamp are the same models. Otherwise, it will not work correctly and may cause unpredictable damage to the machine.
Flammable materials must be kept away from the lamp. To avoid the risk of spontaneous combustion due to high temperature.
After turning off the lamp, please wait 10 minutes before turning it on again. Frequent switching on and off of the lamp will damage the product and reduce the working life of the parts.
Keep the optical components clean as planned. If grease or dust is attached to the lens, the brightness of the lamp will decrease.
Video
FAQ
Hot Tags: led spot moving head light, China led spot moving head light manufacturers, suppliers, factory, oak beam light, spotlights outside house, small moving head, small beam light, slim profile light, dj beam light
