What is Moving Head Lights
A moving head light is a type of and intelligent lights fixture used in many different settings. From theater to concerts, from night clubs to music festivals, this type of lighting can be seen illuminating the stage and performers with beautiful beams of light. It often has an ability to zoom out or in for more precise control of light direction.While state of the art smart lights can produce exceptionally sophisticated effects, the intelligence lies with the human lighting designer, control system programmer or lighting operator, not the fixture itself. For this reason, smart lighting is also referred to as automated lighting, moving lights, moving heads or simply movers.
Benefits of Moving Head Lights
Multidirectional action
Moving head lights have the ultimate freedom of movement. They can rotate, swing and move freely around 360 degrees illuminating everything in their radius. This allows them to illuminate every inch of the stage as well as the spectators.
Low power consumption
Moving head lights primarily gained popularity because of their low power consumption. As compared to traditional counterparts, the moving head lights consume relatively less power. However, the power output of moving head lights is higher than that of traditional lights. Unlike traditional light sources, Moving head lights do not consume electricity when they are not lit.
Energy efficient
Lower power consumption yet equivalent energy output renders the Moving head lights extremely energy efficient. This energy efficiency also allows saving money on the overall electricity bill.
Cost effective
Moving head lights are cost-effective as they help save money on the overall electricity bill. They are also low maintenance which saves money in the long run. The widespread use of technology means that the initial expenditure on moving head lights is significantly lower than the traditional light sources.
Why Choose US
Factory
We are an innovative technology enterprise integrating research and development, production and sales of moving head lights.have many patent certificates and software copyrights
Quality control
We will carry out strict quality inspection on all products before shipment to ensure the quality of the products and bring you excellent quality enjoyment.
24h online service
We are available 24/7 for the duration of your project and are ready to answer any questions or address any concerns our customers may have.
Professional team
The company focuses on the introduction of high-level talents and the cultivation of professional skills,to create a high-quality,high-efficiency,experienced first-class team.
Types Of Moving Head Lights
Beam Lights
It’s a more focused beam of light for creating certain effects such as beams or shafts on the stage. It’s usually with a strong light output to shine on the stage.
Spot Lights
It usually contains gobo wheels, which is a metal disc with patterns cutout of the edges, and these gobos can be projected out of the light fixture to create different interesting effects.Sometimes it contains more than one gobo wheel to create more effects.
Profile Lights
This is an advanced version of intelligent fixtures based on the spot lights. Besides the gobo wheels and animation wheel, they have built-in framing shutters, that can be programmed to project a specific shape of gobo on the stage.
Wash Lights
This type of moving head light has wide beam angle range that can cover larger area for general stage lighting needs, like wash fixtures, they are more spread out and softer in their coverage area to create general lighting inside the scene. With the progress of software and hardware, wash lights are now more and more rich effects, in addition to a large angle zoom in and out, there are many other features, such as effects, pixel mapping, greatly enriched the stage background effect.
The main considerations in the selection of moving head light materials are to meet the functional requirements of the moving head light, manufacturing difficulty, and economy. Made of heat-resistant plastic and molded alloy material shell, the appearance is exquisite. The lamp body arm shell is made of plastic material, and the lamp body support frame, base, side plates, and end plates are made of aluminum alloy castings, stamping parts, car parts, etc. The structure of the lamp determines its mechanical properties, heat dissipation, strength, noise, weight and other factors. The new three-in-one professional beam spot washing machine has 3+1 biprism and various prism combination effects. Designed and manufactured in strict accordance with standards and in line with international standards.
Application of Moving Head Lights
Stage lighting
One of the most common uses of Moving Heads is in stage lighting. They are used to highlight performers and create a dramatic effect that can be adjusted based on the needs of the performance. Moving Heads can be programmed to move in sync with the music or choreography, making them an essential part of any concert or theatrical production.
Corporate events
Moving Heads can also be used in corporate events, such as product launches and conferences. They can be programmed to display company logos and graphics, creating a customized and engaging experience for attendees. Moving Heads can also be used to highlight specific areas of the event space, such as the stage or product displays.
Weddings and special events
Moving Heads are increasingly being used in weddings and other special events. They can be programmed to create a specific mood or ambiance, such as a romantic or festive atmosphere. Moving Heads can also be used to highlight specific areas of the venue, such as the dance floor or cake table.
Outdoor festivals and events
Moving Heads are also popular in outdoor festivals and events where they can be used to light up the stage or create a unique atmosphere. They are often used in combination with other lighting fixtures,to create a dynamic and immersive experience for attendees.
Components Of Moving Head Lights
Light Source
The light source in a moving head needs to be bright and efficient. Arc lamps require a special power supply and light source is not dimmable. Discharge lamps also generate a lot of heat and UV radiation,these are controlled by shields in the lamp housing. A reflector rounds up the photons and points them in the right direction.
Dimming Intensity
Stage lighting needs brightness intensity control dimming,Because the lamps in most moving lights can’t be dimmed electrically, a mechanical method is used. The dimming shutter on a moving head is simply a motor driven, metal mask that gradually cuts down the light output.
Strobe Shutter
Most moving lights also have a second shutter for strobe control, the rapid on off action . The shutter strobe doesn’t dim, it just cuts out light.
Beam Control
Moving spot fixtures have focus and zoom functions, controlled in the usual manner moving lenses. Spots also have Iris capability and some contain beam shaping shutters, which can cut off and angle edges remotely.
How to maintain Moving Head Lights
Regular dust removal
The moving yoke of outdoor moving head lights and the seam of their lampshade are easy to hide dust, so you need to use a vacuum cleaner or a wet rag to remove the surface dust. The moving head lights should be handled gently to avoid collisions, falls, etc.;
Regular lubrication
The moving parts of the moving head lights should have sufficient lubricant.Regularly lubricate the gears and suspension of the rocking headlight. Also replace the brass bushings that surround the motor with a softer material that wears more evenly and lasts longer.
Timely cleaning
Be careful not to use it in places with a lot of wind, sand and dust, or use high-quality products, and clean it in time. After the performance, use the console to extinguish the bulb, and let the lamp continue to work for a period of time without cutting off the power supply,
Internal inspection
Inspecting electrical parts, mechanical parts, and optical settings is essential. Make sure that all conductors of the outdoor moving head light have good contact with the integrity of its internal cables.
Moving head lights are a type of stage lighting equipment that are commonly used in concerts, DJ setups, and theaters. These lights are equipped with spotlights, color filters, and a system of lenses that allow them to move in different directions and create various lighting effects.
The working principle of moving head lights is based on the use of stepper motors and control systems. The steppers motors are responsible for the movement of the light head in various angles such as pan, tilt, and roll. These movements are controlled by the control systems which receive signals from the lighting console or DMX controller.
The lighting console sends digital signals to the control system which then activates the stepping motors to move the light head accordingly. The operator can program a series of complex movements and effects into the lighting console allowing for a wide range of lighting options.
Moving head lights come with various features such as gobo wheels, prism filters, and LED technology which further enhance their capabilities. The gobo wheels and prism filters allow the lights to project patterns and shapes onto surfaces and create various effects. LED lights are energy-efficient and produce high-quality light with a longer lifespan.
Type of Moving Head Light: There are two main types of moving head lights: spot and wash. Spot lights have a narrow beam angle and are ideal for highlighting specific areas or performers, while wash lights have a wider beam angle and are better for adding overall color and ambiance to the stage.
Brightness: The brightness of a moving head light is measured in lumens or lux. Consider the size of your performance space and how much illumination you need to adequately light the stage.
Color Mixing: Look for moving head lights that have a range of colors that can be mixed together to create custom hues. Many lights also offer color macros, allowing you to quickly select pre-programmed color combinations.
Gobos: Gobos are templates that can be projected onto the stage to create patterns. Moving head lights with replaceable gobos offer greater flexibility and creativity.
Movement Speed
Consider the speed and accuracy of the moving head lights, as well as the range of movement. Some lights may have a limited range, while others can pan and tilt a full 360 degrees.
Control
The control options for moving head lights can vary greatly. Options may include DMX, wireless, or even app-based controls. Consider your technical expertise and the needs of your production when selecting a control option.
Budget
Moving head lights can range in price from a few hundred to several thousand dollars. Consider your budget constraints and prioritize the features that are most important for your production.
What Is the Difference Between Shaking Headlights and Beam Lamps
The difference between shaking headlights and beam lamps lies primarily in their function and design.
Shaking headlights, also known as automatic leveling headlights, are designed to adjust the direction of the headlight beams according to the position of the vehicle. This is achieved through the use of sensors that detect the vehicle's height and angle, and then adjust the headlight beams accordingly. The purpose of shaking headlights is to reduce glare for other drivers, and to ensure that the road ahead is illuminated evenly regardless of the vehicle's position.
Beam lamps, on the other hand, are a type of light fixture that can be found in a variety of settings, from homes and businesses to large industrial and commercial spaces. They are designed to emit a focused beam of light in a specific direction, and are typically used for spot lighting or accent lighting. Beam lamps come in various shapes and sizes, but they all share the common characteristic of emitting a concentrated beam of light.
How to Install Moving Head Lights
Check the electrical requirements: Before purchasing or installing moving head lights, it is important to check the voltage and current requirements. Make sure you have the appropriate electrical outlet and enough power capacity for the lights.
Mount the lights: Mounting the lights involves attaching them to a mounting bracket and securing the bracket to a secure surface such as a truss or a stand. The moving head lights should be positioned in a way that allows them to point in the desired direction.
Connect the power supply: After mounting, connect the power supply to the moving head lights. Ensure that the power supply matches the voltage and current requirements.
Connect the DMX cables: DMX cables are used to control the movement and color of the moving head lights. Connect the DMX cable from the lighting console to the DMX input of the moving head lights.
Test the lights: Before the performance or show, it is essential to test the moving head lights to ensure they are working correctly. Test all functions and movements to confirm everything is operational.
What You Should Know When Use Moving Head Lights
Moving head lights are a popular choice for lighting designers and event planners. They offer a wide range of movement, color options, patterns, and effects compared to static lights. If you plan to use moving head lights for your event or performance, here are some essential things you should know:
Understand the different types of moving head lights available in the market, including spot, wash, beam and hybrid. Each type offers unique lighting effects and patterns suitable for different events.
Familiarize yourself with the basic features of moving head lights, such as pan, tilt, focus, zoom, and gobo rotation. These features can help you customize the lighting to fit your event's ambiance.
Determine the ideal position for the moving head lights to provide the desired lighting effect. For instance, you can place the moving head lights on stage trusses, stands, or ground-mounted spots.
Check the venue's power supply to ensure it can handle the moving head light's power consumption. This is important as moving head lights often require high power consumption, which can overload your power supply.
Operating moving head lights requires skill and knowledge. Ensure you have an experienced lighting technician who can set up and operate the moving head lights properly.
Always pay attention to safety precautions when using moving head lights. For instance, avoid placing the lights too close to flammable materials or obstructing walkways or entrances with lighting rigs.
Factory
Factory size over 8000 square meters. XMlite is an innovative technology enterprise integrating theresearch, development, production and sales of moving head lights.
FAQ
Q: What is the purpose of moving head lights?
Q: What is the meaning of moving head light?
Q: What is the function of moving head light?
Q: What is a moving head light?
Q: What is the name of the moving head light?
Q: What is the difference between a moving head light and a beam light?
Q: What are the different types of moving head lights?
Q: What is the purpose of moving head lights?
Q: How does a moving head light work?
Q: How to clean a moving head light?
Q: How long can a moving head light be used?
Q: How is the moving head light controlled?
Q: How to improve lighting efficiency with moving head lights?
Q: How many channels does a moving head light use?
Q: What is the use of moving head lights?
Q: Why do moving head lights require proper maintenance?
Q: What are the factors that affect moving head lights?
Q: What is the maintenance factor for moving head lights?
Q: What are the moving head light beams?
Q: How to keep your moving head light in good condition？
We're professional moving head lights manufacturers and suppliers in China, specialized in providing high quality OEM products with competitive price. We warmly welcome you to buy cheap moving head lights in stock here from our factory. For quotation and price list, contact us now.
Beam Moving Head Lights, low profile led clearance lights, stage led security light